What's Inside A Combine? How To Buy A Case IH 2366 #HowItWorks

7-Iyl, 2020
86 729 Ko‘rishlar soni

Everything you want to know about how a combine works, and how to maintain a Case IH 2366!
Subscribe: bit.ly/SubDGHD | Merch: debossgarage.com/merch
Watch next, "8.3 Cummins Threw a Rod in a Combine [EP1]" uzworld.info/player/video/raW3a7udm9e3ZZo
How does a Case IH 2366 combine harvester work? Everything you need to know about maintenance and what to look for if you want to buy one. #WhatsInside #CaseIH #HowItWorks
Follow us:
Send stuff to Filthy Rich
411 Darling Rd, Canfield, ON Canada N0A 1C0

Merch, Tape Boss & Car Parts: debossgarage.com/store
Tools I use: www.amazon.com/shop/debossgarage
Show us your build project: debossgarage.com/nation
Help us make awesome stuff: www.patreon.com/debossgarage

Watch More Deboss Garage:

From Tractors to Heavy Equipment to Industrial Machines, DGHD will show you how to build, operate, and repair anything with a throttle.

**If the video was helpful, please give it a "thumbs up" and consider subscribing.**

Theme Song: "Travelin'" by SWIB (soundcloud.com/swib-1) CC BY-SA 3.0
All Songs: soundcloud.com/editoraaron/sets/deboss-tunes
Music License: share.epidemicsound.com/deboss (30-day free trial)
© Red Egg Entertainment | made in Canada

NO WARRANTIES: All of the information provided in this video is provided "AS-IS" and with NO WARRANTIES. No express or implied warranties of any type, including for example implied warranties of merchantability or fitness for a particular purpose, are made with respect to the information, or any use of the information, in this video. DEBOSS GARAGE HEAVY DUTY ("DGHD") makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content of this video.
DISCLAIMER OF LIABILITY: DGHD specifically DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES and assumes no responsibility or liability for any loss or damage suffered by any person as a result of the use or misuse of any of the information or content in this video. DGHD recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. DGHD assumes or undertakes NO LIABILITY for any loss or damage suffered as a result of the use, misuse or reliance on the information and content of this video.
USE AT YOUR OWN RISK: This video is for informational purposes only. It is your responsibility to evaluate your own safety and physical condition, or that of your clients, and to independently determine whether to perform, use or adapt any of the information or content in this video. Any automotive repair and/or modification may result in injury. By voluntarily undertaking any task displayed in this video, you assume the risk of any resulting injury; your safety is the sole responsibility of the user and not DGHD.

  • Fellas, just wanted to share my experiences having worked with these machines in the late 90s and in to early 2000s for Case IH out in the former Soviet countries .........the cab post bolts (15:00) have popped out pretty much since the early days, the cab is not well enough supported and this pings the heads off them, there were a few modifications to rectify this but it kind of lived with the machine - maybe a run of weld would help :-) . There was some talk that the gas accumulator wasn't set up and working correctly (on the l.h. chassis frame) but don't think it ever made that much difference, we tended to think that hard driving with high tyre pressures over rough roads and fields didn't help matter. Here in UK they will sometimes change the 3rd concave from small wire to large wire in high yielding cereals.....we used to change the hyd oil cooler if the hydro chewed up rather than flush out.....shaker shoe rails will also break up as well....bit of a weak design. The big wrench also has a socket head on it to test slip the feeder clutch....I have heard that some folks will fit a 2nd rotor belt and cable-tie it up to the adjustable block to make changing a bit quicker, but not sure there's enough room with a chopper gearbox. Anyway.......used to love the sound of that engine at full chat and under load

    Richard WeymouthRichard Weymouth8 kun oldin
  • Hi

    Ryan BeyeaRyan BeyeaOy oldin
  • Those are some complicated pieces of equipment. I can only imagine the upkeep.

    A MeyersA MeyersOy oldin
  • Well dang,,, somebody knows what they are talking about. Great work guys!

    Philip WeathingtonPhilip WeathingtonOy oldin
  • I operated an Axial Flow in rice in the Sacramento Valley around Williams Ca. But first we had to remove the rotor to hardface all the elements on it because rice plants are very abrasive and put a lot of wear on the harvester. As a Dutchman, I was not familiar with rice production.

    Alex VeldhuisAlex VeldhuisOy oldin
  • Awesome detailed vid! Keep em coming! 👍

    6217lex6217lexOy oldin
  • Really enjoyed video. I knew all this bc that’s what we ran for years. Damn good machines if they’re kept up.

    A&R FarmsA&R Farms2 oy oldin
  • Experience

    Andrew UnsworthAndrew Unsworth2 oy oldin
  • I used to work at case ih in grand island Nebraska. 9 years of welding self level frames and sooo many concaves!

    Danny MeyerDanny Meyer2 oy oldin
  • crazy that the engine has to power all that stuff.

    SimonTrent8000SimonTrent80002 oy oldin
  • Hiya

    William T. MusilWilliam T. Musil2 oy oldin
  • Amazing tech.

    Joe GardinaJoe Gardina2 oy oldin
  • I wonder when this farmer has any time left after the combine work he has to do. God bless our farmers.

    Craig MillerCraig Miller2 oy oldin
  • Not all hydrastats are the same

    Thomas tuckerThomas tucker3 oy oldin
  • The last combine that I ran was a 1977, 7700 in 1985 lots of differences Thank you Sir

    Bill AdamsBill Adams3 oy oldin
  • Very interesting...man, a pile of moving parts on that puppy!

    mike scottmike scott3 oy oldin
  • Send rich to welker farms

    J.T. IllingworthJ.T. Illingworth3 oy oldin
  • I've owned a 1688 and now a 2388... After watching this video I've found i haven't been checking things as I should (or just thinking it should be fine). Pretty nervous to actually go look at my machine now haha

    Ethan JohnsonEthan Johnson4 oy oldin
  • Combines are the helicopter equivalent of the agricultural industry: “One million parts rapidly rotating around a major oil leak, waiting for metal fatigue to set in.” And THANK GOD I’ve never had to touch helicopters OR combines! I’ll stick to planes, and garner respect for those that have to work on those finicky beasts!

    ZekeZeke4 oy oldin
  • Love these videos rich @DGHD

    Antonio Claudio MichaelAntonio Claudio Michael4 oy oldin
  • Very cool informative demonstration video @DGHD

    Antonio Claudio MichaelAntonio Claudio Michael4 oy oldin
  • The demonstration videos are very cool @DGHD

    Antonio Claudio MichaelAntonio Claudio Michael4 oy oldin
  • 18th century man's head would explode seeing this modern wonder. My head exploded! What an amazing tool. Kevin is cool. He like...knows stuff.

    Tyler ShawTyler Shaw4 oy oldin
  • More bullshit than an automatic transmission

    Mr HappyMr Happy4 oy oldin
  • Just discovered your channel and loved this video! I purchased my first combine of my own this last week, which is a 2006 model 2388. I'd love to bend your ear about them sometime!

    Clarke FarmsClarke Farms4 oy oldin
  • Careful cleaning those aluminum engine blocks and heads uzworld.info/player/video/bICwfpWfk5bLhIQ

    Fearless FosdickFearless Fosdick4 oy oldin
  • 29:30 where can i find those aftermarket cilinders?

    Massimo PecileMassimo Pecile4 oy oldin
    • That Jen D is super smart. Wonder if she worked at Case at some point

      DGHDDGHD4 oy oldin
    • Think a and I

      Jen DJen D4 oy oldin
  • I really enjoy the ag content.

    Rob and Malisa PetersRob and Malisa Peters4 oy oldin
  • A most Canadian bet if ever there was one... lol

    Dr DrDr Dr4 oy oldin
  • This is an excellent video. I learnt loads. Thanks, I will subscribe

    Trevor MansfieldTrevor Mansfield4 oy oldin
  • Rich do a video about hidroestatic drive!!!! I want to learn about the subject please!!! Good video!!!!!

    Rodrigo VidalRodrigo Vidal4 oy oldin
  • When this combine is as old as you but has less hours 🤣

    Chris BrownChris Brown4 oy oldin
  • I own a custom harvesting and combine rental business and I just added 5 extra 2004 case IH 2366 combine 240HP to my collection. Each was bought at $64,500 thanks to the stock market. Had to go a bit more aggressive in investing to source the funds in just 6 months. I'm looking to add more by end of year.

    Bryan HumphreysBryan Humphreys4 oy oldin
    • Bryan, I'm from Missouri and I want to establish a combine rental service around here by next year. Still saving up for it. thanks for the recommendation. I'd get in touch with her as well.

      Donald McPhersonDonald McPherson4 oy oldin
    • @Bryan Humphreys Just found her official website so I'll drop her a mail right away. Thank you!!

      David MorleyDavid Morley4 oy oldin
    • @David Morley No I don't copy manually. I pay a 10% of monthly profit and it's fair for me considering the profit. I make 15% -20% monthly returns because . The lady I just recommended is a renowned broker and knows what the heck she's doing. You can check her out online if you'd need some help. Good luck

      Bryan HumphreysBryan Humphreys4 oy oldin
    • @Bryan Humphreys ok do you copy the trades manually? Cuz I have a full time job...and what does Monica Javorcic charge for her services?

      David MorleyDavid Morley4 oy oldin
    • @David Morley I have my funds across other securities not just on stocks and I'm more of an aggressive investor. But I don't make picks myself. I use trade signals from a US regulated broker and investment advisor Monica Sullivan Javorcic.

      Bryan HumphreysBryan Humphreys4 oy oldin
  • Pure mechanical porno....and yet a total mangling, killing machine! Just looking at it is like watching a Final Destination movie. Also about like a boat for land, if anything breaks, bring on another $thousand. How does the single rotor design compare to the New Holland twin rotor design I was seeing a lot of in the 80s? LOVE this channel & content!

    ace mobileace mobile4 oy oldin
  • Thanks for sharing. Best Wishes. 👍💪

    Richard LincolnRichard Lincoln4 oy oldin
  • Awesome vid ! Thanks 👍

    Armin K.Armin K.4 oy oldin
  • Very awesome vid ih has the same concepts apply to the 14 series. So If anyone is looking at older ones still very helpful

    Rock FarmerRock Farmer4 oy oldin
  • What is it with Case and splines wearing out? Seems to be a common fault for Case machines.

    Blatt FerencBlatt Ferenc4 oy oldin
  • great video and respect for farmers !

    lolus pololuslolus pololus4 oy oldin
  • Probably never need need one for my plumbing business, but glad I watched. You never know.

    Beer and SkittlesBeer and Skittles4 oy oldin
  • And I watched a couple farming videos and said wow, this is for me for sure till you opened my eyes to the work involved. That was case, if a side by side analysis was done by the other popular kid (john deere) which would be the stronger longer lasting unit and is it possible to get through a season without one breaking down? Also, say engine has two thousand hours, what would the rest of the machine be looking at hours wise?

    Morgan AdairMorgan Adair4 oy oldin
  • Respect for our farmers! Shit tone of expensive mechanical stuff to check,service and maintain... Thanks to all farmers out there who is working around the clock to feed us.

    Samuel Katherine DiozaragoSamuel Katherine Diozarago4 oy oldin
  • Thanks, have a 1670, a 1660 with a leveling system added, from SE Washington St. Farm some sidehills up to 50% slope. My old girl almost identical, never seen a rock trap on one, however, put a few stones through mine, painful. All the Case machines in our area have 4 wheel drive more for climbing hill than mud bit still necessary. Thanks again.

    Bryan BishopBryan Bishop4 oy oldin
  • I think that this thing is more complex than the space shuttle.

    localcrewlocalcrew4 oy oldin
  • Best run through of a combine I’ve ever seen. Excellent video and really enjoy these kinds of run through. Thx

    farmarkfarmark4 oy oldin
  • Kevin really knows how his equipment works. Big respect

    Sam CyanideSam Cyanide4 oy oldin
  • that's a really in-depth video. can you send your camera crew out to the field with Kevin this fall and show what it looks like in operation? i bet guys would like to see that. he's pretty smart running older machines like that; yeah there's a lot of repairing, but they don't cost half a million dollars each. also i'm coming to borrow your light for harvest time.

    yako0000yako00004 oy oldin
  • 4500 separator hours is a pretty high hours for those machines. We had a high hour 1680. Good machine. We rebuilt most of the wear areas you pointed out. Never once replaced that rock trap bearing. Are you running your chains too tight ? FYI, chains last twice as long if they never get rusty - big saving for storing the combine in a shed. I think New Holland builds better combines than IH. TRs and CRs are pretty bullet proof. Seem to have less moving parts. Better engines too. I like 8.3s but they rev too fast and are worked too hard in a combine. No other engine application has a higher duty cycle than a combine. It's hot and dusty and the farmers push the machines to the power limit every minute they are running. "My combine has too much power." - said no farmer, ever.

    TechGuyTechGuy4 oy oldin
    • @ace mobile Yeah, the Cat 3208 wasn't a great engine in those combines. But the Ford I6 diesel and later Genesis (sp?) engines were really good. NH combines haven't changed a lot other than getting bigger and more electronics. TR96-99s are plentiful and cheap. Ditto the early CRs like the CR940. Twin rotor/single rotor, they both work. I'd give NH combines a serious look if I needed a used combine.

      TechGuyTechGuy4 oy oldin
    • I asked the question earlier how a NH twin rotor would compare to the more common single rotor setup. I remember when those came out in the 80s & all the hoopla surrounding them. But I also recall many having fits with the 3208 Cats they came with also. I used to have a detailed NH brochure that showed all the inner workings & studied that thing endless nights as a kid. I wish I still had it.

      ace mobileace mobile4 oy oldin
  • That was so cool. Awesome video

    David CulbertsonDavid Culbertson4 oy oldin
  • This shit is fascinating. I really appreciate that you're making these videos. You should just put up all of these on your regular channel.

    jagardinajagardina4 oy oldin
  • After touring the case ih combine plant, I can confirm that the auger bed is the first part, and everything else gets bolted on around it.

    Ryan KinslerRyan Kinsler4 oy oldin
    • It’s a miracle those work at all!

      Scott ClevelandScott Cleveland15 kun oldin
  • God bless our farmers!!

    Empire of dirtEmpire of dirt4 oy oldin
  • Great video 😃😃😃 I use to work on combines and you explained it really well and it ih & Case at dealer shop

    Nic PatonNic Paton4 oy oldin
  • Oh boy a case o beer. The race is on

    dustin stanaitisdustin stanaitis4 oy oldin
  • Fantastic stuff.

    Andy OramAndy Oram4 oy oldin
  • coming from England who is Vulcan

    Out of Town with Robin BellOut of Town with Robin Bell4 oy oldin
  • Wow 😀

    LorneLorne4 oy oldin
  • Best video of how a combine works. Never seen a video of this like this. Great job guys.

    Mike EralMike Eral4 oy oldin
  • Jesus Christ the complexity, I'm already over fixing it just from watching this video lol

    иїѕмөғяєдкиїѕмөғяєдк4 oy oldin
  • Had a 2388 for 12 or so years cant say I miss it, but it was a decent machine.

    shadedude6gamesshadedude6games4 oy oldin
  • What's with the grey blower looking thing on the front of the older combine that he used to have is that for dusting the combine off after you're done field work or is that for collecting loose grain or what

    justin fischerjustin fischer4 oy oldin
  • 👍👍👍 Awesome channel

    Mike NicholsonMike Nicholson4 oy oldin
  • 1:09 The combine separates the expensive parts from the non expensive And always destroys the expensive parts

    fowletm1992fowletm19924 oy oldin
  • Love the content. Keep em coming.

    Kenneth SchlabachKenneth Schlabach4 oy oldin
  • well that was fascinating, I can't believe I watched every minute of the thing, it's the closest I've been to a combine ya'll

    Gerald BoxerGerald Boxer4 oy oldin
  • With all the combine manufacturers anyone have experience on other makes than case that maybe heavier built/designed more durable? So many bearings wearing out for a machine that just does harvesting.

    POLOLOUS3POLOLOUS34 oy oldin
    • “A machine that just does harvesting” imagine doing all that manually like they used to! Just harvesting lol. The amount of moving parts on these machines And the amount of work they do in a short amount of time is insane. Of course lots of stuff wears out. These are truly marvels of engineering.

      Brad VBrad V4 oy oldin
    • @Dane Glasoe True, ton of things covered in the video and he did reference the hours but did also mention some of the upgrades like added pillow blocks to some bearings and not having to replace things as often. Not cheap machines and makes me nervous with the number of things to maintain vs say an excavator/loader/tractor for example. Farmers have so many things to worry about. So many take for granted.

      POLOLOUS3POLOLOUS34 oy oldin
    • He made it sound bad but that machine has a lot of hours and has some age on it. Any combine kept in service that long will need things replaced.

      Dane GlasoeDane Glasoe4 oy oldin
  • Love these videos on your channel! I've learned a lot about how engines works from your channel, even though I'll never run a machine like this. Amazing that all of this is powered by a single engine.

    twowheeler1000twowheeler10004 oy oldin
    • Well, it is a Cummins....

      DGHDDGHD4 oy oldin
  • That combine would make Rube Goldberg proud with the number of belts, augers, chains and gears involved in making that contraption work.

    SandySandy4 oy oldin
    • IH Axial Flow combines are pretty simple. If you want something complicated, go look at a Gleaner.

      TechGuyTechGuy4 oy oldin
  • Ok I'm not buying a combine now... Too much maintenance... Great video though! Hundreds of dollars per belt!! And there's like 80 billion belts!!!

    Andrew StokesAndrew Stokes4 oy oldin
  • I was doing my apprenticeship with a international dealership when these axial flows first came to Australia in the early 80s. I used to hate doing pre harvest services because you’d have to check for snakes, snakes love mice and mice love combines. I’ve had Dugites slither over me. One of the reasons I switched to earthmovers 😎 good vid guys👍

    Les MansomLes Mansom4 oy oldin
    • Came down here to say the same, way to many snakes over here in WA

      Dean RobertDean Robert4 oy oldin
    • snakes in a combine adds a new dimension to the fun.

      yako0000yako00004 oy oldin
  • This episode was exhausting.. It sure seems like these things could use some design updates... What a nightmare to work on.

    calhollicalholli4 oy oldin
    • Lol This is a old combine so I guess you shouldn’t touch a new one then

      Noah RankerNoah Ranker4 oy oldin
  • I love working on mechanical things but combines are terrible, always need to take apart 7 things just to get to what needs fixed.

    Turbo 2Turbo 24 oy oldin
    • You should work on a Ford 6.4 Powerstroke sometime.

      TechGuyTechGuy4 oy oldin
  • Kevin could have been speaking *any* language; I'm still none the wiser.😂 These things terrify me and, as I don't know where most of the dangerous bits are, you wouldn't get me anywhere near one if it was running. What I *did* take from the video is that even a reasonably new one of these would be a huge money pit. For a machine that costs way more than a lot of *houses* there seem to be as helluva lot of parts that fail/wear out/rot away. Even working on the machine yourself, maintenance must cost a fortune, and *lack* of maintenance will cost even more. $700 for a belt !! I don't usually pay that for a car.😂 Thanks for trying guys; a fascinating video but it just gives me more respect for the folks that run these things, and those who maintain/repair them. 👍 I think the business to be in is ....... making belts for combines. Cheers for now, Dougie.

    2H80vids2H80vids4 oy oldin
  • "It's a $600 or $700 belt" 😳

    JohnJohn4 oy oldin
  • People don’t realize that farmers spend more time working on their equipment than they do operating it

    Jaxon 9882Jaxon 98824 oy oldin
    • It is nowhere near more time fixing than operating. But combines have a lot of moving parts and many wear items. Typically as soon as spraying is done the combine gets pulled out and gone over from front to back. Takes half the time to fix something before harvest starts than in the field during harvest.

      TechGuyTechGuy4 oy oldin
    • Spend money to loose money some years

      Heath EatonHeath Eaton4 oy oldin
    • @safety first in texas there is times that happens and times you make a tiny bit or times you make a lot. Depends. Chances we take

      ME 1217ME 12174 oy oldin
    • @ME 1217 spend money to break even

      safety first in texassafety first in texas4 oy oldin
    • Hard work and lots of labor. Spend money to make money.

      ME 1217ME 12174 oy oldin
  • At least your expenses are a tax right off !

    Scott St.ClairScott St.Clair4 oy oldin
  • How are they as daily drivers?

    DonkDonk4 oy oldin
    • Not great on fuel and a little hard to park Great in the winter though

      Jaxon 9882Jaxon 98824 oy oldin
  • .

    L4Z3R37HL4Z3R37H4 oy oldin
  • Super cool video. I liked it , was really interesting. Should do one on that big 3 wheel tractor too

    niteninja 01niteninja 014 oy oldin
  • Crackin' Ag.

    Wes GatesWes Gates4 oy oldin
  • Awesome video. Have been sniffing around for a 2388 for the last year. Lots of good info.

    Roger LeavensRoger Leavens4 oy oldin
  • This video has made me realize that i need to give farmer more respect.

    Fire DoxFire Dox4 oy oldin
  • I've been fascinated by combines since I was a little kid. Such amazing machines. The amount of moving parts and different types of movement and directions is incredible. It's no wonder they cost a million dollars new

    Michael TaylorMichael Taylor4 oy oldin
  • This is one of the most interesting videos I've ever seen. I learned so much. Thanks so much Rich!

    Bandit GriggsBandit Griggs4 oy oldin
    • Mostly Kevin and the editors on this one!

      DGHDDGHD4 oy oldin
  • That is as complicated as an airplane.

    adrianspeederadrianspeeder4 oy oldin
  • We wash every year after harvest, no problems just grease and oil after. To me that just sounds like an excuse to be lazy.

    Alex StammenAlex Stammen4 oy oldin
    • All depends when your finished and what the weather is like. I've blown dust and parked for the winter and I've done a full wash and let it air dry then park

      aK HuizaK Huiz4 oy oldin
    • Like Kevin said, climate

      DGHDDGHD4 oy oldin
  • Why is it rusted Kevin.... haha

    richard3141592638richard31415926384 oy oldin

    Diane FletcherDiane Fletcher4 oy oldin
    • thank you

      Diane FletcherDiane Fletcher4 oy oldin
    • Regular hydraulic fluid is all they use, Case IH recommends Hy-Tran which is made specifically for them.

      Carson ChaneyCarson Chaney4 oy oldin
  • The big wrench in the engine bay just sitting on its rests by gravity alone sure makes me nervous.

    E FE F4 oy oldin
    • With the access door closed that wrench is held in place by the door....

      Jason ProebstelJason Proebstel3 oy oldin
    • Ya, that wrench ain't going anywhere haha

      Ethan JohnsonEthan Johnson4 oy oldin
    • If that comes out on its own you have much bigger problems because your combine likely lies on its side.

      Armin K.Armin K.4 oy oldin
  • Great video

    Cole AartsCole Aarts4 oy oldin
  • Love it thanks

    stippett129stippett1294 oy oldin
  • Holy shit. 7 tons of crop with the aftermarket bin?! Insane.

    P0tat07P0tat074 oy oldin
  • That kit look like duct tape 😆

    Tractor DoctorTractor Doctor4 oy oldin
  • Anti-seize is not grease and can act as an abrasive in moving parts

    yeahitskimmelyeahitskimmel4 oy oldin
    • It's called sarcasm, if you go back to old vids champ. It's a long standing joke to catch people like yourself! Your keeping the joke alive. " Bravo". Yes more sarcasm

      Dean RobertDean Robert4 oy oldin
  • woah. that's amazing. that's like 100x more moving parts than anything I've ever worked on myself LOL and I rebuilt my 4l60e!

    Hamilton MechanicalHamilton Mechanical4 oy oldin
    • An engine has more moving parts than one of those transmissions.

      92'PowerDiesel92'PowerDiesel4 oy oldin
  • We just started servicing our 2588 combine for the upcoming malt barley harvest. This video will be very helpful. We've had Case IH combines since 1990, yet there are things you guys discussed that I hadn't ever looked at. Thanks a lot for sharing the knowledge.

    RiverbendBicyclesRiverbendBicycles4 oy oldin
  • Love videos with Kevin! Gives me an appreciation for all the hay farmers in the extended family, nothing that complicated (or expensive) in our veggie farming world.

    damianryan5damianryan54 oy oldin
  • What people dont know about large farms is that they typically have 2-3 full time mechanics on the job 24-7 and about 2 offsite mechanics with dealer connections ready to pick up deliver and install parts with the other mechanics. So when you drive by a massive farm with a Costco sized parking lot filled with equipment I can guarantee that a mechanic is working on 5-7 pieces of equipment at the same time while the others are in service.

    13ecker13ecker4 oy oldin
    • Wheres that??? Very few farms round here have even 1 mechanic I'm farming 20k ac myself Do my own work and use the dealer if required Neighbours one side are corperates 30kac they dont have any mechanics and none thats mechanically inclined Beyond greasing everything is though the dealer My cousins are on 90kac Thsy have 1 full time mechainc Think you'll find most farms just have people doing maintenence during the quiet season and they farm for the rest of the year Usually no official training just farmers learning on the job Or like my cousins 1 trained guy and loads of machine operators that help with grunt work when they have time off from driving Most farms round here are 10 to 20kac No UZworld farmers have mechanic's Theyre just self trained and get hints from the dealer I'm trained heavy deisel mechainc just because I did an apprenticeship out of school but no one else I know did that We're just famrers firstt and do mechainc work on off time

      fowletm1992fowletm19924 oy oldin
  • I was that kid who always wanted to know how heavy farming equipment worked, but no one could tell me because they didn't know. Now I know. I also know how much of a pain they must be to work on now.

    Austin WAustin W4 oy oldin
  • How do you have time to farm? There has to be some ridiculous time in those repairs. Appreciate that you still do, no farms no food.

    weirdweaselweirdweasel4 oy oldin