Micro Pelton Turbine

17-Fev, 2021
735 977 Ko‘rishlar soni

Check out KiwiCo.com/Tom50 for 50% off your first month of ANY crate!
Enjoy my videos? These are made possible due to help from my Patrons. Please consider supporting my efforts: www.patreon.com/tomstanton
The resin printer is the Elegoo Mars 2 Pro and I was using the standard Elegoo clear resin. I was tempted to build a custom UV curing station, but ended up ordering the Elegoo Mercury Plus 2 in 1, which I definitely recommend as it makes the post processing far easier. As mentioned in the video, none of this was sponsored/provided by Elegoo, I just saw it all on Amazon Prime and thought I'd give it a go.
----------------------------------------------------------------------------------------------------------------------------------------
My Other Equipment:
Main camera - amzn.to/2vlvlC6
Main lens - amzn.to/2gMrhru
Main tripod - amzn.to/2tqRjBt
Secondary Tripod - amzn.to/2t1NkMh
Microphone - amzn.to/2uuv9n0
Audio recorder - amzn.to/2v3mjcG
Banggood affiliate: www.banggood.com/?p=LT0710618750201406EK
Twitter: twitter.com/TomStantonYT
3D Printer filament sponsored by 3D Printz UK: 3dprintz.co.uk/
----------------------------------------------------------------------------------------------------------------------------------------

Fikrlar
  • 0:45 is redditors when they see aunt cass.

    Angry BoiAngry Boi2 soat oldin
  • This may be weird but I have some ideas I’ve thought of because of your video that really have no other purpose than to be shared with you. Is there a more efficient means for me to share them with you.

    Mitch WigginsMitch Wiggins4 soat oldin
  • Three nozzles at the same time on the turbine?

    KristianKristian14 soat oldin
  • I think the turbune is more efficiënt because it takes more energy to get going but then onze it is going don't have to put a lot of energy in it to keep it going

    arno vandezandearno vandezande15 soat oldin
  • Try to compress water in the bottle.

    MiDXMiDX21 soat oldin
  • Hey Tom, I love your videos! I used to want to be an aeronautical engineer but the school was too hard for me and I found my passion elsewhere. Still, watching your videos fills me with joy at getting to see the engineering process. I would love to see another 3D printed airplane video. Something I've been thinking about is using a 3D printer to print parts that are ideal for printing (structurally) like the internal frame of an aircraft, but not the skin. This would help a lot with the weight and allow you to make quite magnificent models that require just a little extra work to get flying compared to a fully 3D-printed vehicle. Just some food for thought... I can't wait to see what you have for us next! Thank you so much!

    VarueVarueKun oldin
  • why doesnt this man has like 5 million subs

    Koral Deniz KaraüzümKoral Deniz KaraüzümKun oldin
  • Add an micro aspirator at the air nozzle, this should increase the volume of the air across your turban giving it possibly a 10x increase

    dave insanityinanutshelldave insanityinanutshellKun oldin
  • The efficiency of the turbine decreases if the speed increases and the pressure decreases, what would happen if you design a turbine that runs more efficiently at a lower pressure and reduce the pressure with a simple regulator to keep the pressure longer at the most effective pressure? Maybe slightly less output but for longer time and at an higher efficiency.

    Ron FloresRon FloresKun oldin
  • interesting and awesome content! Did you design the pelton turbine by using Reynolds' law of similitude? Would be interesting because we should assume, that the behaviour of the turbine in the same Reynolds number with water and air should be comparable or do I have a knot in my head?

    grambadambagrambadambaKun oldin
  • I do so enjoy observing the engineers mind at work. inspiration for not only my own works, but for the next gen of makers and such, please continue the good works and the having a much fun doing it!

    l0g1cb0mbl0g1cb0mb2 kun oldin
  • What I see in this gentleman's videos is the clear and present difference between _making_ and _engineering._

    Filthy LucreFilthy Lucre2 kun oldin
  • This was really awesome, can you please tell how to have such great engineering concept and build such cool thing. you can also make a detail video about it.

    Ojas MaywadeOjas Maywade2 kun oldin
  • dude you are so good at explaining things

    DSLRguideDSLRguide2 kun oldin
  • The upbeat detail weekly reflect because mile fourthly talk behind a belligerent fibre. colossal, astonishing offence

    6 66 63 kun oldin
  • I've recently been seeing a lot of stuff on air multipliers, and although I haven't done too much research, and have no idea on efficiency and such, but it'd be interesting to see your take on them

    daddy destroyerdaddy destroyer3 kun oldin
  • You should enclose the air peice with the entrance from bottle amd exhaust on the chassis offset by a small ammount to increase power transfer

    Velvet The foxVelvet The fox3 kun oldin
  • Excellent demonstrations

    David WilkieDavid Wilkie3 kun oldin
  • Create a servo-controlled aperture for the nozzle, and you can attenuate air flow.

    Nooz ZooNooz Zoo3 kun oldin
  • hero's engine drone

    DIORZ_PROJ3CTDIORZ_PROJ3CT4 kun oldin
  • Can you show us how to make a turbine engine here is a link for your help: www.instructables.com/Homemade-Tin-Can-Turbine-With-3d-printed-Compresso/ (Please show step by step how to make it love from Pakistan)

    Muhammad MehboobMuhammad Mehboob5 kun oldin
  • use air to make electrify put one those DVD burner motors aren't they three phase . use it as a generator

    Tiitan RutseTiitan Rutse5 kun oldin
  • So could you make the turbine a little more efficient by turning the blades 90 degrees, that way centrifugal force is working in your favor too?

    Schweet119Schweet1195 kun oldin
  • Is this what powers the LEDs in my rainfall shower?

    OnePalProductionsOnePalProductions5 kun oldin
  • The last option is great, but it occurs to me that the performance at higher speeds will be proportional to the outflow of air. Could a Tesla or steam turbine be used for the same purpose?

    Martin KuthanMartin Kuthan5 kun oldin
  • *What else is needed for you to generate electricity with this?*

    The Other SideThe Other Side5 kun oldin
  • Mr. Stanton... Do you airplain sir?

    Liam HillLiam Hill5 kun oldin
  • Great content as always ! I really should learn blender

    Omar AissaniOmar Aissani5 kun oldin
  • Bravo et merci

    Solutions & DébrouilleSolutions & Débrouille5 kun oldin
  • 0:05 POV: you're playing bad piggies with RTX on

    CodeMan1131CodeMan11315 kun oldin
  • ......not bad for a ginger.

    The GeneralThe General5 kun oldin
  • ODM gear need, want plz

    Nói KristjánssonNói Kristjánsson5 kun oldin
  • uzworld.info/player/video/m4m_gZmOn6nLY2M check out this video to see what i mean for the "venturi pump" turns out there is already name for this in the aviation industry "aviation aspirator" 4:26m in video, or TLA "tank liquid agitator" its the same principle. who ever in your setup i assume some sort of valve will be required due to the small amount of air available. (my idea is to use this to lower the comsumption of the system, but i guess it could be used to add power instead). up to you to chouse the best aplication.

    CMDR RDZCMDR RDZ5 kun oldin
  • 0:44 made me laugh

    Ryan Paul TeruelRyan Paul Teruel6 kun oldin
  • The shiny bobcat rahilly unfasten because plough physically drop from a thirsty weapon. uptight, imaginary cement

    Vickie SandersVickie Sanders6 kun oldin
  • I like how he just slapped integza with a bottle

    Risen SnakeRisen Snake6 kun oldin
  • Place the nozzles on the tips of the rotor blades. Some early helicopters had this design. It had done trouble with hit gases. Since you use cold compressed air there should nothing to be worried of. Placing nozzles on tip of the rotor will drive the rotor and save the weight of the turbine and gear.

    Matthias MayMatthias May6 kun oldin
  • The anxious tin inevitably attract because libra lally extend by a dizzy mini-skirt. aberrant, homeless women

    Serai ResanaSerai Resana6 kun oldin
  • I'm a little lost here beforehand it was about a jet powered bicycle and now it's now you end it with this why is UZworld screwing with me today

    captain kirkcaptain kirk6 kun oldin
  • Try to split the incoming stream in two halves and turn them towards each other so they will cancel each other's energy.

    Alexander KosolapovAlexander Kosolapov6 kun oldin
  • Try to curve the bucket in way that the water (or air) gets redirected back to the incoming stream.

    Alexander KosolapovAlexander Kosolapov6 kun oldin
  • My favourite part is where he bats integza off the screen with a bottle.

    Camille CirrusCamille Cirrus6 kun oldin
  • Enclosing the turbine might improve efficiency a bit as its less drag from the sorrounding air. The real question here is how is the exhaust gonna be made.

    Shun Ryuenji MatoiShun Ryuenji Matoi6 kun oldin
  • Why you slap it.....

    Hassi MassoudHassi Massoud6 kun oldin
  • Electropump- electromotor

    Lescha ElliLescha Elli6 kun oldin
  • Gidro mini electromotor(like principle Gidroelectostation )

    Lescha ElliLescha Elli6 kun oldin
  • Thanks Tom, as always, well done and very informative!

    jack allreadjack allread7 kun oldin
  • If the air powered Helicopter has energy that is too short lived, you could always build a lightweight steam boiler and use two air turbines to make a vertical take off osprey airplane.

    Mr.McGooverMr.McGoover7 kun oldin
  • I guess the nozzle on its own ejects high pressure air that spreads out evenly distributing it's momentum partially in the horizontal direction. This is the same reason rockets optimised for sea level are less efficient in a vacuum. If you had a bell on it to bring the exhaust down to 1 atmosphere it would be more efficient but I imagine that's quite hard to get right.

    TatskaariTatskaari7 kun oldin
  • is anyone gonna mention the linear flow at 5:15 ?

    FlareFlare7 kun oldin
  • Tom ur a wild man ! thx

    Guy FallonGuy Fallon7 kun oldin
  • Super cool dude. Keep it up.

    Lukas ZiebaLukas Zieba7 kun oldin
  • What happens if you make a enclosure for the turbine?

    Terje SvendsenTerje Svendsen7 kun oldin
  • So the final version is very close to a standard impulse turbine that is commonly used in steam applications. Here's a tip. Make two more of those exact same wheels and stack them up with the first in alternating directions. Connect the first and third wheel to your shaft and hold the second (opposite direction wheel) rigid to your frame. Make sure the blades of the first and third wheel are aligned and there you go.

    JBEEUDJBEEUD7 kun oldin
  • Hello Tom did you try with vacuum? How to made it? Surprise me...

    Théorie de la GravitéThéorie de la Gravité7 kun oldin
  • I think the reason the propeller is more efficient is because the airflow is only utilizing the conservation of momentum (mv). Whilst the propeller is utilizing the kinetic energy (1/2mv^2)

    KofichiKofichi7 kun oldin
  • i love this sort of stuff, always been thinking about stuff like a hydrofoil piston etc etc blah blah .. i won't bore you with a details and can't find the only one on youtube someone made in a jungle in thialand somewhere .. you strap it to a rivers bridge and it pumps up and down ... basic stuff

    joe cooljoe cool7 kun oldin
  • One day Tom is gonna create an air powered car and be missing the next day

    MiiLK tMiiLK t7 kun oldin
  • Шаубергер тоже заморачивался с формой лопаток.

    Первый ученикПервый ученик7 kun oldin
  • tom, you are a god damn treasure

    Nick LachenNick Lachen7 kun oldin
  • I really want to see how the turbine powered aircraft competes with the piston powered aircraft. The diaphragm one was very promising!

    Nikola TasevNikola Tasev7 kun oldin
  • Give me the power of air king ❤️

    DARK BOTDARK BOT7 kun oldin
  • another Tom youtube from the UK, I think u need to make an alliance

    Fauzan NrFauzan Nr7 kun oldin
  • Make a glider that you could launch with your trebuchets!

    Jokubas MickusJokubas Mickus7 kun oldin
  • It would be nice if you used grams instead of newtons, it's easier to picture the weight

    EddyCoversEddyCovers7 kun oldin
  • Just looking at the thrust equations: for a turbine driven propeller its thrust equation is proportional to V^2 while for the nozzle its thrust equation is proportional to just V. Turbine Driven Propeller Wins. Also in order to get more juice out of that nozzle, you would need to create the right pressure ratios, converging/diverging nozzle, etc. to expand the flow isentropically as close to the back pressure as possible for max nozzle efficiency.

    worstthinker27worstthinker277 kun oldin
  • Are you sure it is a good idea to place you UV 3d printer near the window in a daytime? :)

    MrPasheeMrPashee7 kun oldin
  • What about a hybrid? the air turbine plugged to a generator to charge a battery that runs a motor with the propeller 🤔

    AMV12SAMV12S8 kun oldin
  • I wonder if using a denser gas like CO2 or N2 or Argon would help? All are fairly easily attainable at a Welding supply store. Might be a good power/weight ratio test. In fact, I wonder if putting a few grams of dry ice (solid CO2) into the canister would work out well on that front. Certainly give you more than the 30s of runtime at a fairly reasonable weight penalty.

    Steve LacySteve Lacy8 kun oldin
  • nice work , love your data analysis

    Skillful ManSkillful Man8 kun oldin
  • Interesting, it would be interesting to hook this up to a large pressure plenum and modulate the pressure as the form of velocity control. There might be some good reasons behind pressurizing the bottle to a max pressure and using a small pressure regulator to keep the max thrust a little bit lower and prolong the time of flight.

    Wayne PageWayne Page8 kun oldin
    • This vid is the history of steam engines from piston to steam turbine. I expect the conclusion is a 16mm multi-stage blade set with reversing blades between them?

      Ask to seduce MissAsk to seduce Miss8 kun oldin
  • Incorporate a pelt wheel into a turbo, the bigger the better because the air has more time to travel through my system

    Blood Sweat And Tears Forever learningBlood Sweat And Tears Forever learning8 kun oldin
    • @Ask to seduce Miss ya that's amazing, I invent stuff all the time just to find out it's already been made aha it feels like I'm getting visions from the past

      Blood Sweat And Tears Forever learningBlood Sweat And Tears Forever learning7 kun oldin
    • Wouldnt a francis wheel be the best for this? Efficient and the exhaust can be faced down to add to verticle thrust.

      Ask to seduce MissAsk to seduce Miss8 kun oldin
  • This was an interesting build. And the ribbing that you and Integza are doing towards each other is really cracking me up. LOL

    Steven IngramSteven Ingram8 kun oldin
  • Mechanical advantage?

    A Milky Way Laniakea SuperclusteriteA Milky Way Laniakea Superclusterite8 kun oldin
  • Thank you for the videos. I think I learn more from your videos than in my high school physics class... I'm not sure what to think now that I have said that.

    Skyler RoperSkyler Roper8 kun oldin
  • Dude, you might be the one youtuber that people watch till the end. Man keep up the good work. Love your vids ❤️

    GrenadeGodGrenadeGod8 kun oldin
  • Great video, really interesting, but why did you say math? You’re not American and mathematics is plural.

    Aaron CunninghamAaron Cunningham8 kun oldin
  • It will be awesome if you connect this to a energy generator, to see how much watts you can generate.

    Marcos BerghahnMarcos Berghahn8 kun oldin
  • Make the turbine so that it is integrated into the nozzle-cap so that 0 air can escape , and all is utilized in the system.

    L. D.L. D.8 kun oldin
  • Hmm 92 percent with these Damm buckets uzworld.info/player/video/fZvbn65pgNO1iao

    George KowalskiGeorge Kowalski8 kun oldin
  • integza stop

    ETHAN-JAMES SIMPSONETHAN-JAMES SIMPSON8 kun oldin
  • Could you add a duct to the nozzle to create a ram like air multiplying effect?

    jraejrae8 kun oldin
  • An idea - a constant stream of air might result in some dissipation of energy as the bucket passes through. Would the concept of a timed burst of air that's synchronised to the rotational speed (think WW1 fighters with timing chains shooting through the props) allow a greater efficiency?

    treborsnave76treborsnave768 kun oldin
  • Please make a electric motor with bell electromagnets

    GAME STARGAME STAR8 kun oldin
  • The reason why the turbine is more efficient is because the 2nd and 3rd Laws of Newton. Less air mass is displaced with the nozzle only configuration, hence less force is applied and less reaction happens to the opposite direction. That's my guess.

    Douglas CarvalhoDouglas Carvalho8 kun oldin
  • Wouldnt a francis wheel be the best for this? Efficient and the exhaust can be faced down to add to verticle thrust.

    Beach&BoardFanBeach&BoardFan8 kun oldin
  • This vid is the history of steam engines from piston to steam turbine. I expect the conclusion is a 16mm multi-stage blade set with reversing blades between them?

    teamidristeamidris8 kun oldin
  • Soooo, you reinvented the impulse turbine I get!?

    Roberto TarterRoberto Tarter8 kun oldin
  • @Tom Stanton check out the aerodynamics of your newest model printed. It could have some trouble there

    LeoschnardoLeoschnardo8 kun oldin
  • Maximum efficiency of these turbines is when the turbines edge velocity is 1/2 of the jet stream velocity.

    KingCosworthKingCosworth9 kun oldin
  • Keep stroking the algorithms folks - by commenting. Wonderful content, from an old fellow Brit :)

    hen kohen ko9 kun oldin
  • what about a turbine where each "blade" or "bucket" splits the airflow into two paths but the 3dprinted cross section of the blade includes a section from a tesla valve, so you take some of the incoming air and redirect it around to create a high pressure obstruction, which also pushes back pressure in the second chamber and pulls more energy out of the air slow? the problem is the time each blade is in contact with the stream is minimal, and then you have to deal with the effects it has on the rest of its journey around.. hrm

    Dice BlueDice Blue9 kun oldin
  • So can we call your air optimized version the "Micro Stanton Turbine"?

    Scott GriswoldScott Griswold9 kun oldin
  • I normally watch stuff about video games and anime how tf is this in my recomended. I mean it was pretty frickin cool tho

    OmNi JOmNi J9 kun oldin
    • Would a 90° cog ruin the efficiency? If not, you could try aiming the jet downwards and still power the propeller...

      hen kohen ko9 kun oldin
  • 5:55 YOU JUST INVENTED THE STANTON TURBINE 👏

    Dice BlueDice Blue9 kun oldin
  • Have you investigated the design of centrifugal superchargers or turbo driven superchargers which are used to turn rotational energy into pressure and may be able to be reversed

    John GamerJohn Gamer9 kun oldin
  • 4:50 this video is amazing

    Dice BlueDice Blue9 kun oldin
  • 2:22 hnnnnnnnnnnnng

    Dice BlueDice Blue9 kun oldin
  • do a dry ice engine, for a bike, craft or animatronic ED-209

    Dice BlueDice Blue9 kun oldin
  • Prop moves more air than the nozzle, basic physics

    RnkRnk9 kun oldin
UZworld